Painted Bodies Quilted maple Bandsawing quilted maple Plates and braces Lots of plates Pin router/inside carver Inside Carving Roughed backs 5 roughed out necks Necks and Overlays Neck and fretboards Archtop Necks Clamping head veneer Rough headstock Sides in mold Trimming sides to fit Blocks Clamped Sides clamped in mold Blocks In Sides clamped Applying linings Cutaway linings glued in Cutting F-holes Sylvan and a top At the holding jig Ready for f-hole binding F-hole trim Gluing f-hole trim Beginning f-hole bindings F-hole taped Finished f-hole and Label Braces and top Roughed braces Rough X Brace Braces Glued Brace Glued On Tops braced Body In Mold Back in mold Rim and top Top and body Body Glued Up Top Glued On Body Together Archtop bodies Binding back Binding Taping binding 2 quilted bodies Sanding Binding Cleaning Binding Back Detail Inlay station Doing Inlays Inlays for fretboard Inlays In fretboard Inlaying Fretboard Beginning to Inlay/Jackie Neck Inlays Body and Neck Rough neck and back Neck Alignment Gluing neck to body Neck gluing Finished body and neck 3 Archtops together All five at once 5 Archtops in the rack Back Painted Painted Bodies Painted Bodies Painted Bodies Bodies Painted Painted Bodies Roughed stepped plates 3 necks Roughed out headstock Side being bent in mold Body Together/Back Prototype back Inlaying fretboard Finished Neck Finished inlays Headstock Design Fitting Neck Guitar pieced together Prototype together P1 S1 P2 P1 S3
